Thursday, October 21, 2010

CCIE SP 3.0 Lab Equipments

Please stop saying IOS XR will make it too expensive and difficult to pass the new CCIE SP 3.0. The real CCIE candidates should be grateful because now anyone who can pass the lab proves at least he knows XR and latest features on 12.2.33SR IOS. In fact, Cisco should modify the name of the track to CCIE SP NGN or something, to distinguish SP 3.0 with SP 2.0. And instead of whining about how to find a lab to practice XR, you should start asking the following questions: will the XR be used as P or PE? 7600 simulator to run 12.2.33SR means no real hardware, what could be tested without the hardware? What technology can be asked from ME series? And so on

Lab Equipment
• Cisco XR12000 Series Routers
• Cisco 7200/7600 Series equivalent Routers (Using Simulator)
• Cisco ME3400E Series Switches

Software Versions
• XR12000 routers running IOS-XR Software Version 3.9.1
• 7200/7600 routers running IOS Software Version 12.2-33 SR
• ME3400E switches running IOS Software Version 12.2-54 SE

15 comments:

Anonymous said...

Dear Himawan;
I agree with what you said, but the issue of the hands on is still remaining with IOSXR for the candidates. is there a feasible way to practice XR commands when the real equipment are not around?

Anonymous said...

Hi Himawan -

First of all, I wanted to say that my colleagues and I have appreciated your blog postings over the past year. They are very thorough and thoughtful.

I did want to validate that the issue does still remain. I have personally seen the affect that the SP 3.0 has had on the industry. Several colleagues of mine have pursued the CCIE Service Provider as a "First CCIE" because it provides an added level of intrigue. We connected with our Cisco SE's and Account Manager to see about potential "Loaner Gear" for the XR12k's and ME's - but were told that access to those were next to impossible at this point in time.

As I stated when I spoke at this year's Internet2 Conference here in the States, Service Provider Technology continues to drive the "Next Generation" of Networking as it has for several (IT) generations.

That's why it is such a travesty that the two biggest providers of CCIE Training (Internetworking Expert and IPExpert) are moving away from offering training for the CCIE-SP. I have received in writing from both that they are not planning on providing CCIE-SP training after April 17th. I believe that is a travesty.

So with that said, do you have any practical advice that we can use to help our folks obtain the CCIE-SP 3.0? We have enough Lab Equipment to build tens of R&S Labs and 10+ SP 2.0 Labs, but aren't sure where to turn for the 3.0. Please help!

Thanks!

ccie training said...

Cisco's Networking model information is shared nicely in your blog. Actually I am looking to get ccie training online. Please do share some ccie training plans.

Roch Mechatronics said...

We are Manufacturer, Exporter and supplier of Laboratory Equipments, Lab Equipments, Laboratory Instruments, Scientific Equipments, Research Instruments with wide range of Bioreactor Fermenter, Shaker, Growth Chamber, Autoclave Sterilzer, Freezing & Cooling, Incubator, Heating Cooling Baths, http://www.rochmechatronics.com , Freez Drying Equipment, Oven, Centrifuge, HPLC System, Gas Chromatography, FT-IR Spectrometer, Atomic Absorption Spectrophotometer, Micropipette, Gel Documentation, Electrophoresis Unit, Clean Room Equipments, Laboratory PCR, Humidity chamber, Environmental Chamber, Deep Freezer, Laboratory Incubator, BOD Incubator, Laboratory Autoclave, Laboratory Instruments. Humidity Environmental Chamber have been working successfully in many research, Education and agriculture industries. Microprocessor/PID/Digital control provides precise temperature, Relative Humidity and Illumination maintain uniform and accurate growth environment, Timer, Alarm, Auto-Tunning and Auto Stat Stop function. Utilizing a high capacity semi-closed freezing compressor, it maximizes the collecting capability of the cold trap while the installation of a super vacuum pump also maximizes the movement of moisture, A Heat medium, Enhancing the capacity of the Freeze Dryer.

Naveen Sharma said...

we are educational laboratory equipment manufacture, exporter and suppliers in India for schools, colleges and Teaching labs to all middle east countries.more information

Naveen Sharma said...

Thanks for your great information, the contents are quiet interesting.I will be waiting for your next post.
Scientific lab equipment is Manufacturers and Exporters of Laboratory Equipment in India.

Andree Symond said...

Standard person can validate the Equipment through calibration order.
They will check every the parameters,
Place Heat,humidity & additionally the components changed by maintenance and others.
writing is simply great,thank you for the blog.

equipment validation

seoaticoindia said...

Atico Export are the scientific lab equipment manufacturer exporter supplier schools, colleges and Teaching lab and other countries provider in india.

Madness Gabrill said...


Written cleaning procedures should be established. Attention should be addressed to dedicate certain equipment to specific products,
such as fluid bed dryer bags and to residue originating from the cleaning detergent or solvent themselves.
By packaging equipment I am referring to primary packaging equipment.


equipment validation

Madness Gabrill said...

We can then execute the protocols, analyse and interpret the data collected, resolve any deviations noted during the execution
These kind of post are always inspiring and I prefer to read quality content so
I happy to find many good point here in the post, writing is simply great, thank you for the blog.

equipment validation

Lee Ghirale said...

Validation has become one of the pharmaceutical industry’s most recognized and discussed subjects.
It is a critical success factor in product approval and ongoing commercialization.
This article provide brief introduction about the pharmaceutical process validation and its importance according to regulatory provision,
also provide the answer of question like why to do, when to do and how to do it.
This work is to present an introduction and general overview on process validation of pharmaceutical manufacturing process.
Quality is always an imperative prerequisite when we consider any product.



equipment validation

Plastic Labware said...

Thanks for sharing your valuable information.I found it very useful.Keep posting amazing content like this.
Plastic Labware India

Ratna said...

I just wanted to make a quick comment to say GREAT blog!….. I’ll be checking in on a regularly now….Keep up the good work
humidity chamber manufacturer

Unknown said...

chinalaboven com supplies all series cheap laboratory ovens price, and lab oven manufacturer sale laboratory incubators equipment to worldwide from our factory in China
china lab oven

Aliza Jamess said...

Hello what a outstanding write-up We've occur a corner and feel everyone I've been searching out and about for this equivalent form of write-up for beyond weekly and hardly came across this kind of.
Regards:Laboratory Ovens